Differences

This shows you the differences between two versions of the page.

--- 5_25_floppy_drives:mitsumi_newtronics_d509v2 [2021/06/11 11:07] – js
+++ 5_25_floppy_drives:mitsumi_newtronics_d509v2 [2021/06/13 19:32] (current) – [Mitsumi/Newtronics D509V2] js
@@ Line 24: / Line 24: @@
 It uses a leadscrew to facilitate head movement and locks the disk with a lever. Head loading is done with via mechanical linkage.
-It uses the [[#tsd_2_a|TSD 2 "A"]] (83 maximum seek-able tracks) or [[#tsd_2_b|TSD 2 "B"]] control board and the Kumagaya YY1N1 or Mitsumi M90BCL-3  motor board.
+It uses the [[#tsd_2_a|TSD 2 "A"]] (83 maximum seek-able tracks) or [[#tsd_2_b|TSD 2 "B"]] control board and the Kumagaya 771N1 or Mitsumi M90BCL-3  motor board.
 ===== Pictures =====
 | {{:5_25_floppy_drives:mitsumi_newtronics_d509v2:back.jpg?200 |}} | {{:5_25_floppy_drives:mitsumi_newtronics_d509v2:top1.jpg?200 |}} {{:5_25_floppy_drives:mitsumi_newtronics_d509v2:top2.jpg?200 |}} | {{:5_25_floppy_drives:mitsumi_newtronics_d509v2:bottom1.jpg?200 |}} {{:5_25_floppy_drives:mitsumi_newtronics_d509v2:bottom2.jpg?200 |}} {{:5_25_floppy_drives:mitsumi_newtronics_d509v2:bottom3.jpg?200 |}} |
@@ Line 43: / Line 43: @@
 ==== Broken solder joints on power connector ====
 The solder joints of the power connector can break over time and after repeated plugging and unplugging.
-{{:5_25_floppy_drives:mitsumi_newtronics_d509v3:fix_powerconnector_1.jpg?200|}}
+\\ {{:5_25_floppy_drives:mitsumi_newtronics_d509v3:fix_powerconnector_1.jpg?200|}} \\
 This causes problem with power delivery to the drive resulting in abnormal behaviour.
-{{:5_25_floppy_drives:mitsumi_newtronics_d509v3:fix_powerconnector_2.jpg?200|}}
+\\ {{:5_25_floppy_drives:mitsumi_newtronics_d509v3:fix_powerconnector_2.jpg?200|}} \\
 To fix this issue the solder joint have to be simply re-soldered.
-  - Do this for both sides of the spring.