JoSchYs private Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
<WRAP tablewidth column 30% right>
{{METATOC}}
~~NOTOC~~ \\
^ Manufacturer    | Chinon |
^ Model    | FZ-506 |
^ Density    | <abbr>High Density (HD)</abbr>, <abbr>Double Density (DD/2D)</abbr>, <abbr>Single Density (SD/1D)</abbr>((Read-only))  |
^ Sides    | <abbr>Double Sided (DS/2S)</abbr>, <abbr>Single Sided (SS/1S)</abbr> |
^ Rotation speed | 300, 360 |
^ Maximum seekable tracks   | 84 |
^ Interface | Shugart \\ (PC-AT compatible) |
^ Data Connnector | 34 position card edge |
^ Power Connnector | 4 pin Molex |
^ Head movement | Metal belt |
^ Head loading | Mechanical |
^ Disk loading | Lever |
^ Known colors |<WRAP>
| <colorswatch #ABA28B: > | Dark Beige \\ (PC-AT Gray) |
</WRAP>|
</WRAP>
====== Chinon FZ-506 ======
The FZ-506 is a 5.25" double sided high density floppy drive made by Chinon.
All revision use metal belts to facilitate head movement and lock the disk with a lever. Head loading is done with via mechanical linkage.
The drive can read and write at high density and double density and only read at single density.

It uses the JVC SS01, JVC SS02 or Sankyo LB18B motor board.
===== Pictures =====
| {{:5_25_floppy_drives:chinon_fz-506:front.jpg?200 |}} | {{:5_25_floppy_drives:chinon_fz-506:top1.jpg?200 |}} \\ {{:5_25_floppy_drives:chinon_fz-506:top2.jpg?200 |}} | {{:5_25_floppy_drives:chinon_fz-506:bottom1.jpg?200 |}} {{:5_25_floppy_drives:chinon_fz-506:bottom2.jpg?200 |}} \\ {{:5_25_floppy_drives:chinon_fz-506:bottom3.jpg?200 |}} |

===== Revisions =====
==== Rev A (early) =====
=== Description ===
The early revision A uses the [[#fxxcsep0x_x|099FXXCSEP0X(X)]] control board.
=== Pictures ===
| {{:5_25_floppy_drives:chinon_fz-506:rev-a_back1.jpg?200 |}} | {{:5_25_floppy_drives:chinon_fz-506:rev-a_pcb1.jpg?200 |}} |

==== Rev A (later) ====
=== Description ===
The later revision A uses the [[#fxxcsep0x_x|099FXXCSEP0X(X)]] control board.
=== Pictures ===
| {{:5_25_floppy_drives:chinon_fz-506:rev-a_back2.jpg?200 |}} | {{:5_25_floppy_drives:chinon_fz-506:rev-a_pcb2.jpg?200 |}} |

==== Rev F ====
=== Description ===
The revision F uses the [[#fxxxsep01_x|399FXXXSEP01(X)]] control board.
=== Pictures ===
| {{:5_25_floppy_drives:chinon_fz-506:rev-f_back.jpg?200 |}} | {{:5_25_floppy_drives:chinon_fz-506:rev-f_pcb.jpg?200 |}} |

===== Jumper settings =====
==== 099FXXCSEP0X(X) ====
{{ :5_25_floppy_drives:chinon_fz-506:099fxxcsep0xx.pdf |}}
++++View PDF|
{{pdfjs 100%,800px>:5_25_floppy_drives:chinon_fz-506:099fxxcsep0xx.pdf?page-width}}
++++

==== 399FXXXSEP01(X) ====
{{ :5_25_floppy_drives:chinon_fz-506:3x9fxxxsep01x.pdf |}}
++++View PDF|
{{pdfjs 100%,800px>:5_25_floppy_drives:chinon_fz-506:3x9fxxxsep01x.pdf?page-width}}
++++