{{METATOC}} ~~NOTOC~~ \\ ^ Manufacturer | Canon | ^ Model | MD5501 | ^ Density | High Density (HD), Double Density (DD/2D) | ^ Sides | Double Sided (DS/2S), Single Sided (SS/1S) | ^ Rotation speed | 300, 360 | ^ Maximum seek-able tracks | 83((Electronically limited)) | ^ Interface | Shugart \\ (PC-AT compatible) | ^ Data connector | 34 position card edge | ^ Power connector | 4 pin Molex | ^ Head movement | Leadscrew | ^ Head loading | Mechanical | ^ Disk loading | Latching push button | ^ Known colors | | | Deep Beige | | ====== Canon MD5501 ====== The MD5501 is a 5.25" double sided high density floppy drive made by Canon. It uses a leadscrew to facilitate head movement and locks the disk with a latching push button. Head loading is done via mechanical linkage. It uses the [[#k36-0189-04|K36-0189-04]] or [[#k36-0213-03|K36-0213-03]] control board and the YG-H2 motor board. ===== Versions===== There are two front bezel versions, one being half height and the other being quarter height. ==== Half height ==== === Pictures === | {{:5_25_floppy_drives:canon_md5501:b_back.jpg?200 |}} | {{:5_25_floppy_drives:canon_md5501:b_top.jpg?200 |}} | {{:5_25_floppy_drives:canon_md5501:b_bottom.jpg?200 |}} | | {{:5_25_floppy_drives:canon_md5501:b_front.jpg?200 |}} | ::: | ::: | ==== Quarter height ==== === Pictures === | {{:5_25_floppy_drives:canon_md5501:a_back.jpg?200 |}} | {{:5_25_floppy_drives:canon_md5501:a_top.jpg?200 |}} | {{:5_25_floppy_drives:canon_md5501:a_bottom.jpg?200 |}} | | {{:5_25_floppy_drives:canon_md5501:a_front.jpg?200 |}} | ::: | ::: | ===== Jumper settings ===== ==== K36-0189-04 ==== {{ :5_25_floppy_drives:canon_md5501:k36-0189-04.pdf |}} ++++View PDF| {{pdfjs 100%,800px>:5_25_floppy_drives:canon_md5501:k36-0189-04.pdf?page-width}} ++++ ==== K36-0213-03 ==== {{ :5_25_floppy_drives:canon_md5501:k36-0213-03.pdf |}} ++++View PDF| {{pdfjs 100%,800px>:5_25_floppy_drives:canon_md5501:k36-0213-03.pdf?page-width}} ++++