5_25_floppy_drives:chinon_fz_506
This is an old revision of the document!
Table of Contents
| Manufacturer | Chinon | ||
|---|---|---|---|
| Model | FZ-506 | ||
| Density | HD, DD/2D, SD/1D1) | ||
| Sides | DS/2S, SS/1S | ||
| Rotation speed | 300, 360 | ||
| Maximum seekable tracks | 84 | ||
| Interface | Shugart (PC-AT compatible) |
||
| Data Connnector | 34 position card edge | ||
| Power Connnector | 4 pin Molex | ||
| Head movement | Metal belt | ||
| Head loading | Mechanical | ||
| Disk loading | Lever | ||
| Known colors |
|
Chinon FZ-506
The FZ-506 is a 5.25“ double sided high density floppy drive made by Chinon. All revision use metal belts to facilitate head movement and lock disk with a lever. Head loading is either done with via mechanical linkage. The drive can read and write at high density and double density and only read at single density.
It uses the Samsung DMFSEC05B, JVC SS02 or Sankyo SB94A motor board.
Pictures
 |   |    |
Revisions
Rev A (early)
Description
The early revision A uses the 099FXXCSEP0X(X) control board.
Pictures
 |  |
Rev A (later)
Description
The later revision A uses the 099F1ACSEP07 control board.
Pictures
 |  |
Rev F
Description
The revision F uses the 399FXXXSEP01(X) control board.
Pictures
 |  |
Jumper settings
099FXXCSEP0X(X)
399FXXXSEP01(X)
1)
Read-only
5_25_floppy_drives/chinon_fz_506.1620671099.txt.gz · Last modified: 2021/05/10 20:24 by js